-->
Recovered Energy

            OIL WATER SEPARATORS
              by Recovered Energy, Inc

      Oil Water Separator Home Page Separator Products Services pricing Frequwntly Asked Questions
 BOSS Products Products for Handling Oily Water in Bilges, Sumps, Compressor Condensate and many Industrial Applications
Call for Assistance
208-637-0645 ext 7016
Gary Chandler
FAX 708-668-7939
gary@recoveredenergy.com
Quality Features           
High Quality Components
Steel Vessel
Epoxy Coating
Filter Media
Piping
Centrifugal Pump
Level Sensor
Control Panel
TPH Monitor
Options
Certifications
USCG Certification
IMO 60(33) & 107(49)
ABS Type Approval
Canadian Type Approval

Advantages
Ready to Operate
Automatic Operation
Simple Operation
Small Footprint
Self Monitoring
Withstands Motion
Low Operating Cost
Quality Components
Quick Ship
Consultation

Photos
Flying Photos
Project Photos

Oil Water Separators

Heavy Duty - Simple - Efficient - Affordable
2 gpm (1m3/hr) up to 500 gpm (110 m3/hr)

Bilge Water Separators
NEW BOSS IMO MEPC 107(49) Certified
Standard BOSS IMO MEPC 60(33) Certified

Marine/Industrial Separators with High Flow Option
High Flow BOSS Series "H"   

Industrial Separators with Oil Content Monitoring
Standard BOSS Series "T"

Industrial Separators without Oil Content Monitoring
Standard Separator    Gravity Only Separator

Compressor Condensate Separators
Compressor Condensate Separators

Large Volume Separators
50-200gpm Separators

Platform/FPSO Separators
Platform/FPSO Separators
Produced Water Treatment

Filtration Only
Filter Systems
Unique "Easy Exchange" Filter

TPH Monitor Only
TPH Monitor
Mobile Field Test TPH Monitor


 BOSS Product Details Products for Handling Oily Water

NEW BOSS IMO MEPC 107(49) Certified
Bilge Oil Water Separator

In January of 2005, many countries began requiring new ships and ships replacing separators (over 400 tons) to meet the IMO MEPC 107(49) regulations. This regulation requires removal of not only free oil as the previous regulation did, but also what is called "fluid C". Also oil content monitors are required to track results of separation. This new requirement has significantly raised the price of a bilge separator and limited the separators to choose from. The BOSS Series 107 brings you the best, most economical system available today to meet this new requirement. Our filter exchange program makes it easy.
Get a Quote

Back to Top

BOSS IMO MEPC 60(33) Certified
Bilge Oil Water Separator

With US Coast Guard and IMO MEPC 60(33) certification our standard BOSS separators are installed all over the world in many applications. They are known for their Heavy Duty construction, Simple and Efficient Operation and Affordability. Each unit comes built to operate for long periods of time in a harsh Industrial/Marine Environment with very little maintenance, attention or trouble. This unit can be provided to match any electrical power needs. Normally provided standard with a 3 phase power requirement.
Get a Quote

Back to Top

BOSS Marine/Industrial High Flow
Oil Water Separator

This new option can save a tremendous amount of money on a separator in the situation when large amounts of water need to be processed that are mostly clean, but must be monitored and processed if oil content is above the limit. As an example 400 gpm can be processed from a pond or tank and moniored continuously. The separator is bypassed until it is needed and then processes the oily water at 45 gpm when needed.
Get a Quote

Back to Top

BOSS Series "T"
Industrial Oil Water Separator with Oil Content Monitor (TPH)

These series "T" model separator systems include oil in water (TPH) monitoring and Recycle Systems that test the discharge water and assure compliance with the discharge limit. Any water not meeting the limit is recycled.
Get a Quote

Back to Top

BOSS Series "S"
Industrial Oil Water Separator without Oil Content Monitor

For all kinds of industrial applications these series "S" model separator systems are built to be for totally automatic operation. No consummables or maintenance. Just set them and forget them.
Get a Quote

Back to Top

BOSS Series "SG" Gravity Only
Oil Water Separator

For those industrial situations where sufficient head is available, this "G" series of oil water separators have no moving or electrical parts. This makes this unit fool safe forever. It just works and without the electrical components is very favorably priced.
Get a Quote

Back to Top

NEW BOSS Series "C" Compressor Condensate
Oil Water Separator

Specifically designed to handle compressor condensate, this separator is 100% gravity fed. A "tophat" on the system is designed to accept pressurized water directly from the copressor or dryer. The water then flow through a gravity system where most of the oil is separated and finally though a filter to polish off the remaining oil.
Get a Quote

Back to Top

Platform Separator & Custom Skided Separators

Recovered Energy is an experienced manufacturer of custom separation systems design for placement on oil platforms, jack-up rigs and FPSO's. Often these units are placed in hazardous areas with special electrical considerations & classifications. These units can be manufactured for flow rates from 25gpm to 3500gpm. Typically, these systems have many options for monitoring water including flow transmitters, pH monitors, UV disinfection and turbidity monitoring. More information on these custom systems is available on our platform site.
Get a Quote

Back to Top

Produced Water Treatment Systems

Recovered Energy is offers custom separation systems designed for treatment of produced water. Usually these units are placed in hazardous areas with special electrical considerations & classifications. Produced water treatment systems are typically in the range of 100gpm to 3500gpm. This is usually a simple system designed for high volume processing at second or third level separation.
Get a Quote

Back to Top

TPH Oil Content Monitor

Recovered Energy is a distributor of the Deckma OMD line of TPH Monitors. DECKMA offers the most advanced oil content measuring devices, to reliably prevent pollution from oil. The TPH measures the oil content in the sample through our advanced light scattering principle. Infrared light is passed through the sample and captured by an array of solid state sensors. The signals are then processed and through the application of advanced algorithms the displayed oil content disregards virtually all influence of solids present in the sample. Thus oil content is displayed and turbidity from other sources is disregarded. The OMD provides two independent alarm contacts, for the operation of an audible alarm and/or operation of an automatic discharge shutdown device.
Get a Quote

Back to Top

Portable TPH Oil Content Monitor System

Recovered Energy offers a complete package for mobile field testing of oil content in water streams. This package comes with the TPH Monitor mounted in a case with a battery pack for remote operation.
Get a Quote

Back to Top



Site Links - Oil Water Separator
Oil Water Separator Home Page
Oil Water Separator Advantages & Features
Oil Water Separator Benefits
Oil Water Separator Products & Options
Oil Water Separator Services
Oil Water Separator Pricing
Oil Water Separator Frequently Asked Questions

Site Links - Platform Separator
Platform Separator Home Page
Platform Separator Advantages & Features
Platform Separator Options
Platform Separator Frequently Asked Questions
Platform Separator Photos
Platform Separator Services
Platform Separator Brochure


Other Recovered Energy Links
BOSS Standard Separator Home Page
Plasma Gasification Home Page


     Base & Option Descriptions
Base Separator Unit
Every base unit is a complete system built
to Heavy-Duty Industrial/Marine Standards.
more...


Standard versus Economy Models
What are the differences between the
standard and economy models of the BOSS
more...


Construction & Coating Options
The BOSS oil/water separation system is
constructed of carbon steel and coated
more...


Internal Options
Extra heavy carbon steel walls provide
an adequate corrosion allowance on the
more...

Mounting Options
The BOSS oil/water separation system
uses a solid three leg system of carbon
more...


TPH (Oil in Water) Monitor Options
Three different TPH (Oil Content)
Monitors are available providing
more...


Satisfy any Electrical Requirement
The BOSS oil/water separation system
can be supplied to meet any electrical
more...


Level Switch Options
Either a capacitance or a conductance
level switch can be supplied to meet
more...


Control Panel Options
The BOSS oil/water separation system
is supplied standard with a NEMA 4X
more...


Oil Discharge Options
Options for the oil discharge include
everything from a standard check valve
more...


Pre-Filter Options
Three different options are available
for a pre-filter system to prevent
more...


Post Filter Options
A post-filter can be useful and in
some cases necessary to further clean
more...


pH Meter Options
In certain applications it is desirable
to be able to monitor the pH of the
more...


Turbidity Meter Options
A Turbidity Meter can be added as an
option to monitor the turbidity of
more...


Flow Transmitter Options
In certain applications it is desirable
to be able to monitor the process water
more...