Recovered Energy

            OILY WATER SEPARATORS
              by Recovered Energy, Inc

      Oily Water Separator Home Page Separator Products Services pricing Frequwntly Asked Questions
 BOSS Products Products for Handling Oily Water in Bilges, Sumps, Compressor Condensate and many Industrial Applications
Call for Assistance
208-637-0645 ext 7016
Gary Chandler
FAX 708-668-7939
gary@recoveredenergy.com
Quality Features           
High Quality Components
Steel Vessel
Epoxy Coating
Filter Media
Piping
Centrifugal Pump
Level Sensor
Control Panel
TPH Monitor
Options
Certifications
USCG Certification
IMO 60(33) & 107(49)
ABS Type Approval
Bureau Veritas Type Approval
China Classification Society Type Approval
Marine Equipment Directive Type Approval

Advantages
Ready to Operate
Automatic Operation
Simple Operation
Small Footprint
Self Monitoring
Withstands Motion
Low Operating Cost
Quality Components
Quick Ship
Consultation

Photos
Flying Photos
Project Photos

Standard BOSS Oily Water SeparatorPlatform BOSS Oily Water Separator


BOSS OIL WATER SEPARATOR ADVANTAGES & BENEFITS

Complete – Ready to Operate
BOSS oil water separator units are shipped complete with motor, pumps, piping and controls and are ready to be easily installed and operated without delay.


Automatic Operation
Operation of this unit is a simple process. With just a little training the system can be started and runs automatically from that point on.


Simple Reliable Design & Operation
These oil water separator systems are designed to be simple. No complicated piping or schemes. Reliability comes as a result of the solid construction, the lack of moving parts and the simplicity.


Small Footprint
The BOSS oil water separator is designed to fit on ships, platforms and other tight spaces. This unit has a small footprint making it adaptable to most situations.


Low Consumables– Low Maintenance
The standard oil water separator uses no consumables of any kind including filters. This means lower operating costs and headaches. Although the new IMO MEPC 107(49) certified unit requires a filter, the design remains simple and media replacement is made easy. The rugged construction of the oil water separator and it's lack of moving parts make maintenance minimal.


Self Monitoring / Self Priming
These marine oil water separator units are designed from the bottom up to operate automatically and monitor and adjust to your conditions. Self priming systems mean hassle free operation. There is no need for these oil water separator units to be installed on a flat, level, or even immobile surface. This makes them ideal for trucks, ships and other mobile applications.


Withstands Heavy Vibration/Motion
There is no need for these oil water separator units to be installed on a flat, level, or even immobile surface. This makes them ideal for trucks, ships and other mobile applications. Designed for ships, heavy vibrations, violent motion and up to 30 degree plum tilt cause no problems with performance or reliability on these oil water separators.


Low Operating Cost
Because of the solid construction of these marine oil water separators, low maintenance requirement, and low consumables, the operating costs are incredibly low.


High Quality Industrial Components
Each component used in the marine oil water separators has been individually selected for it's industrial strength, strong vendor support, reliability and low maintenance requirements.


Units in Stock for Quick Shipment
We stock various sizes of basic marine oil water separators so as to be able to respond quickly to your needs. Client satisfaction is at a premium at Recovered Energy, Inc. We can often take a stocked separator and add the options you need quickly to get you up and separating. Give us a call to see what we can do for you.


Custom Need Consultation
Our engineering department is available for consultation regarding your custom marine oil water separator requirements. Each Specific application usually has some specific needs. Let us help you determine exactly what will work for you.



BOSS MARINE OIL WATER SEPARATOR STANDARD FEATURES



Solid Steel Vessel
All vessels in the standard oil water separator unit are constructed from extra heavy carbon steel to ASME specifications to withstand many years in harsh environments. Stainless steel options are also available.


Marine Epoxy/Urethane Coating
Entire vessel assembly is blasted to a near white finish and is coated with a heavy industrial epoxy primer followed by an industrial strength urethane topcoat. Other coating options are also available.


Coalescing Media
A polypropylene or HDPE coalescing media is placed inside each separator. The media will last for a long period of time without any maintenance or cleaning. Replacing media is a simple process.


Centrifugal Pump with SS Housing
This high quality pump comes with a TEFC motor and stainless steel housing and impeller. Close coupled design of the pumps saves space and simplifies maintenance and installation of these bilge oil water separator units. Stainless steel components on the liquid end provide high quality and corrosion resistance. Top centerline discharge and foot support under casing ensures self-venting and reduces misalignment from pipe loads. High operating efficiency lowers operating costs. High quality mechanical shaft seals and o-rings bring additional reliablility.


Heavy Duty NEMA4X Control Panel
These standard cabinets are made from high impact resistant polycarbonate or fiberglass material and will withstand harsh marine environments. Protection to IP65 is maintained when fastened. Explosion proof boxes are also available for all marine oil water separator units.


High Quality Oil in Water TPH Monitor
Different TPH (oil in Water) monitors are used to meet various certifications. These TPH monitors are calibrated prior to delivery and have a alarm setpoint adjustment. The TPH Monitors are designed to account for turbidity in the water thereby reducing false positive alarms. Each monitor that comes with the BOSS marine oily water separator unit and is fully installed and programmed.


Quality Conductance Level Sensor
The standard oil water separator comes with a reliable conductivity level switch. The conductivity level switch operates on a simple conductance principle whereby a small electrical current is passed through the conductive liquid between two electrodes. Because this sensor does not detect non-aqueous liquid such as oils and other hydrocarbons, the oil-water interface is detected. Individual probes sense the high and low water levels. A module provides the control signal to the separator to start and stop the pump and open and close the associated valves.


Factory installed Bronze Piping & Valves
All piping and valves are provided in bronze and red brass to be corrosion resistant and withstand the harsh marine environment They are installed at the factory, thus the bilge oil water separators are prepared to be easily installed and operational in a very short time.


Customizable Options
With all the flexibility that the BOSS Marine Oil Water Separation systems have built in, we can customize your system to your specific need. If you need 500 GPM we can accomplish this with either multiple units or custom designing a system to your needs. You will find easy access to our engineers, who can help you through solving any oil water separator need.



BOSS MARINE OIL WATER SEPARATOR CERTIFICATIONS



US Coast Guard Certified
Our line of BOSS marine Oily Water Separator is certified by the US Coast Guard. These certifications include both the older IMO MEPC 60(33) certification and the new IMO MEPC 107(49) certification. Units were tested by certification labs to operate within the limits and regulations of the IMO standards. Coast Guard certification is therefore available for your unit as an option if you need it.


IMO - International Maritime Organization
The IMO has established the standards that have to be met for certification. Our BOSS units have been tesed to these standards and the testing verified by the USCG for both regulation 60(33) and regulation 107(49).


ABS Certification
ABS has given it's product design assesment approval to the BOSS Separator.


Bureau Veritas Type Approval
A certificate of Type Approval has been obtained from the Bureau Veritas.


China Classification Society Type Approval
A certificate of Type Approval has been obtained from the CCS.


Marine Equipment Directive Approval
This system is certified to the European Marine Equipment Directive.


Other Certifications
Other certifications are available including CE Mark and ATEX Directive.











Site Links - Oily Water Separator
Oily Water Separator Home Page
Oily Water Separator Advantages & Features
Oily Water Separator Benefits
Oily Water Separator Products & Options
Oily Water Separator Services
Oily Water Separator Pricing
Oily Water Separator Frequently Asked Questions

Site Links - Platform Separator
Platform Separator Home Page
Platform Separator Advantages & Features
Platform Separator Options
Platform Separator Frequently Asked Questions
Platform Separator Photos
Platform Separator Services
Platform Separator Brochure


Other Recovered Energy Links
BOSS Standard Separator Home Page
Plasma Gasification Home Page